Corrections to HeyPhone documentation

Online discussion forum for BCRA's Cave Radio & Electronics Group

Moderator: David Gibson

User avatar
David Gibson
Posts: 601
Joined: Thu 16 Mar 2006 23:45

Corrections to HeyPhone documentation

Post by David Gibson » Thu 01 Mar 2007 12:08

John Hey tells me...
There is a mistake is in the receiver theoretical drawing. The pot VR3 and C59 are shown going to the centre (4.5V) line whereas they connect to earth. The PC board is correct.

User avatar
David Gibson
Posts: 601
Joined: Thu 16 Mar 2006 23:45

Re: Corrections to HeyPhone documentation

Post by David Gibson » Wed 28 Mar 2007 18:49

Aha! I have finally located the note from John Hey on the PCB mod...

On the top of the transmitter board, there is a track which fuses with a
plated through hole which it shouldn't. John usually clears it with a sharp drill before shipping the boards.

Post Reply